Users Guide
Parameter Action/Description
This field is optional.
Enable TCP/ARP
Fingerprinting
13. To enable TCP/ARPfingerprinting, select the Enable TCP/ARP Fingerprinting check
box.
This feature allows the Netbridge service to capture TCPand ARP packets and post
the derived inputs to the Device Profiler.
NOTE: This option appears only when you specify a Span Port.
Management Port 14. To configure the Management Port parameters, click Configure. The Configure
Management Port dialog opens. For details, see Management Port Configuration on
page 501.
Data/External Port 15. To configure the Data/External port, click Configure.
For details, see Data/External Port Configuration on page 502.
DNS Settings 16. To configure the DNSsettings, click Configure.
For details, see DNS Settings Configuration on page 502.
AD Domains Displays a list of the joined Active Directory domains.
17. To join an active directory domain, click Join Domain.
For details on joining an AD domain, see Join ADDomain Configuration on page 503.
Table 274: Server Configuration > System Page Parameters (Continued)
Management Port Configuration
To configure the W-ClearPass server's Management port:
1. From the Administration > Server Manager > Server Configuration > System > Management Port
section, click Configure.
The Configure Management Port dialog opens.
Figure 494: Configure Management Port Dialog
2. Select IP Version: Select the IP version—IPv4 or IPv6.
3. IP Address: Specify the IP address (IPv4 or IPv6) to access the W-ClearPass Policy Manager.
4. Subnet Mask: Specify the management interface subnet mask for an IPv4 address.
IPv6 addresses do not require a netmask as they use Classless Inter-Domain Routing (CIDR).
5. Default Gateway: Specify the default gateway for the management interface.
6. Click Update.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 501