Users Guide

Service Parameter Action/Description
Accounting
Log Accounting Interim-
Update Packets
To store the Interim-Update packets in session logs, select TRUE. FALSE is the
default setting.
Thread Pool
Maximum Number of
Threads
Specify the maximum number of threads in the RADIUS server thread pool to
process requests.
Number of Initial Threads Specify the initial number of threads in the RADIUS server thread pool to
process requests.
Active Directory Errors
Window Size Enter a duration during which Active Directory errors are accumulated for
possible action. The default is 5 minutes.
Number of Errors Enter a number to specify the number of Active Directory errors that can occur
within the defined Window Size and have the self-healing Recovery Action taken.
The default is 150.
Recovery Action Select one of the following recovery actions from the drop-down list:
l None: To initiate no self-recovery action. This is the default.
l Exit: To restart the RADIUSserver. (The monitoring daemon will restart it.)
l Restart Domain Service: To restart the Domain service.
Security
Reject Packet Delay Specify the delay time before sending an actual RADIUS Access-Reject message
after the server decides to reject the request.
Maximum Attributes Specify the maximum number of RADIUS attributes allowed in a request. The
default is 200.
Process Server-Status
Request
l TRUE: Send replies to Status-Server RADIUS packets.
l FALSE: Do not send replies to Status-Server RADIUS packets. This is the
default setting.
Main
Authentication Port Specify the ports on which the RADIUS server listens for authentication
requests. Default values are ports 1645 and 1812.
NOTE: You can configure the Authentication Port to different values if desired.
Table 282: Service Parameters > RADIUS Server Service (Continued)
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 519