Users Guide
TACACS Server Options
The Service Parameters >TACACSServer dialog provides two parameters:
l TACACS+ Profiles Cache Timeout
l TACACS+ HTTP Thread Pool Size
Figure 513: Service Parameters > TACACS+ Server Dialog
Specify the Service Parameters > TACACSserver parameters as described in the following table:
Service
Parameter
Action/Description
TACACS+
Profiles
Cache
Timeout
Specify the time (in seconds) for which TACACS+ profile result entries are cached by
W-ClearPass Policy Manager.
TACACS+
HTTP
Thread Pool
Size
Specify the maximum number of simultaneous requests the server can handle.
The default value is 100.
The range is from 5 to 200.
When the server has reached the limit or request threads, it defers processing new
requests until the number of active requests drops below the specified amount.
Increasing this value reduces HTTP response latency times.
Table 285: Service Parameters > TACACS Server
System Monitoring Page
By configuring the System Monitoring parameters, you can ensure that the external Management
Information Base (MIB) browsers can browse the system-level MIB objects exposed by the W-ClearPass Policy
Manager appliance. The options in this page vary based on the SNMP version that you select.
To configure the System Monitoring parameters:
1. Navigate to the Administration > Server Manager > Server Configuration page.
2. Select the W-ClearPass server of interest.
3. Select the System Monitoring tab.
The System Monitoring configuration dialog opens:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 523