Users Guide

Understanding the IPsec Tunnel Status Information
A way to quickly decipher the IPsec tunnel status information is as follows:
l If the tunnel status shows ESTABLISHED, only IKE Phase 1 is complete.
l If the tunnel status shows INSTALLED, Rekeying, IKE Phase 2 is complete.
Example 1
If tunnel status shows as shown in Figure 523, Phase 1 is complete but Phase 2 is failing. Look at the Audit
Viewer events (Monitoring > Audit Viewer) to find the root cause.
Figure 523: IPsec Tunnel Status: Only IKE Phase 1 Complete
Example 2
When the tunnel status displays the information as shown in Figure 524, Phase 2 is also complete.
Figure 524: IPsec Tunnel Status: IKE Phase 1 and Phase 2 Complete
Creating VLANs
To create VLAN interfaces:
1. Navigate to the Administration > Server Manager > Server Configuration.
2. Select the W-ClearPass server of interest.
3. From the Server Configuration page, select the Network tab.
The Server Configuration > Network page opens.
4. From the VLANS option, click Create VLAN.
The Create VLAN dialog opens:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 533