Users Guide
Server Configuration Cluster Options
This section describes the cluster-related options that are available from the Administration > Server
Manager > Server Configuration page.
l Synchronizing the Cluster Date and Time with the NTP Server
l Changing the Cluster-Wide Password
l Managing Policy Manager Zones
l Configuring NetEvents Targets
l Configuring Virtual IPSettings
l Clearing Machine Authentication Cache
l Making a Subscriber Node
l Cluster-Wide Parameters
Synchronizing the Cluster Date and Time with the NTP Server
To synchronize the date and time on the nodes in a cluster with a Network Time Protocol (NTP) server:
1. Navigate to the Administration > Server Manager > Server Configuration page.
2. Select the Set Date and Time link.
The Change Date and Time dialog opens to the Date &Time tab.
Figure 530: Change Date and Time > Date & Time Tab
3. Specify the Date & Time parameters as described in the following table, then click Save:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 537