Users Guide

538 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Description
Synchronize
time with NTP
server
To synchronize with a Network Time Protocol (NTP) server, enable this check box (enabled by
default).
NOTE: You can also specify the date and time for the cluster manually by disabling the
Synchronize time with NTP server check box and entering the current date and time in the
dialog provided.
Primary Server and Secondary Server
NTP Server
Specify the IPaddress or host name for the Primary NTPserver and the Secondary NTPserver.
Table 292: Change Date and Time > Date & Time Parameters