Users Guide

550 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Performance Monitor
Rendering Port
Specify the port for performance monitor rendering.
The default value is 80.
Multi Master Cache Durability For theMulti-Master Cacheto survive most abrupt shutdowns, set this to
Normalor Full.
The default value is OFF.
NOTE: Enabling this feature may result in some performance degradation.
CLI Session Idle Timeout Specify the maximum idle time permitted for CLI users, beyond which the session
times out.
The default value is 30 minutes. The allowed range is 5 to 1440 minutes (24
hours).
When this parameter is changed, the changes take effect when the client opens
a new CLI session. Any active CLI sessions will continue to use the old timeout
setting—they have to be disconnected and reconnected for the updated timeout
value to take effect.
Disable TLSv1.0 support To disable Transport Layer Security (TLS) v1.0 support, select one of the
following options:
l None
l Admin
l Network
l All
Disable Change Password for
TACACS
When logging in for TACACS user authentication:
l If set to FALSE (the default setting), after entering a blank password, you are
presented with an option to change the TACACS user password.
l If set to TRUE, the option to enter the TACACS user password is displayed.
The option to change the TACACS password is not displayed.
Disable TLSv1.0 support To disable Transport Layer Security (TLS) v1.1 support, select one of the
following options:
l None
l Admin
l Network
l All
Table 297: Cluster-Wide Parameters > General Page Parameters (Continued)