Users Guide

Parameter Action/Description
the NTLM hash passwords are removed for all the users.
NOTE: When you set this value to TRUE, you must reset all the passwords to
reenable RADIUS MSCHAP authentication against the user repositories.
Store Local User
Passwords using
reversible encryption
To enable cleartext password comparison against local users, set this to TRUE.
If you set this to FALSE, cleartext password comparison against local users is not
possible because the reversible passwords for local users are removed.
NOTE: After setting this value to TRUE, you must reset all the local user passwords
to reenable cleartext password comparison against local users.
Table 304: Cluster-Wide Parameters > Database Parameters (Continued)
Profiler Parameters
The following figure displays the Cluster-Wide Parameters > Profiler dialog:
Figure 549: Cluster-Wide Parameters > Profiler Dialog
1. Configure the Cluster-Wide Parameters > Profiler parameters as described in the following table:
Parameter Action/Description
Profiler Scan Ports To change the list of ports to scan and add custom fingerprints to classify
based on them, enter the new TCP port numbers.
The TCP ports scanner checks to see if the specified Profiler Scan Ports
are open. The default TCP ports are 135 and 3389.
Process wired device information
from IF-MAP interface
Choose whether to process wired device information from the IF-MAP
interface.
The default is FALSE.
Enable Endpoint Port Scans using
Nmap
Set this option to TRUEto enable Endpoint scans using Nmap (Network
Mapper).
NOTE: The Open Ports scanner is disabled when Nmap-based port
scanning is enabled.
Table 305: Cluster-Wide Parameters > Profiler Tab Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 561