Users Guide
562 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
When Nmap scan is enabled, the following warning is displayed:
WARNING: Setting this value to TRUE enables active scan of the host for
open ports. This can be resource intensive. Also, the Profiler Scan Ports
value is ignored when Nmap scan is enabled.
Enable Endpoint Port Scans using
WMI
Set this option to TRUEto enable Endpoint scans using WMI (Windows
Management Instrumentation).
Netflow Reprofile Interval Specify the interval after which endpoints will be reprofiled.
The default value is 24 hours. The minimum value is one hour.
Table 305: Cluster-Wide Parameters > Profiler Tab Parameters (Continued)
Collecting Logs
When you need to review performance or troubleshoot issues in detail, Policy Manager can compile and save
transactional and diagnostic data into several log files. These files are saved in Local Shared Folders and can be
downloaded to your computer (see Downloading Local Shared Folders on page 570).
To collect logs:
1. Navigate to Administration > Server Manager > Server Configuration.
The Server Configuration page opens.
2. Click Collect Logs.
The Collect Logs dialog opens.
Figure 550: Collect Logs Dialog
3. Enter an output filename and add the .tar.gz extension to the filename.
4. Select the types of logging information you want to collect. The types of logging are: