Users Guide

The following figure displays the Device MAC Authentication service template:
Figure 24: Device MAC Authentication Service Template
Specify the parameters in the Device MAC Authentication service template as described in the following
table:
Parameter Action/Description
General
Select Prefix Select a prefix from the existing list of prefixes.
This populates the preconfigured information in the Authentication and SP Details sections.
The Name Prefix field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to identify
services that use templates.
Network Settings
Select Device Select a preconfigured device from the drop-down list.
To create a new device, leave this field blank and enter the remaining fields.
Device Name The name of the device is populated automatically based on the device selected from the
Select Device field. If you create a new device, enter the name of the device.
IP Address The IP address of the device is populated automatically based on the device selected from the
Select Device field. If you create a new device, enter the name of the device.
Vendor Name The name of the manufacturer of the device is populated automatically based on the device
selected from the Select Device field. If you create a new device, enter the name of the
manufacturer of the device.
RADIUSShared
Secret
Enter the shared secret that is configured on the controllerand in Policy Manager to send and
receive RADIUS requests.
Enable RADIUS
CoA
Select to enable RADIUS initiated Change of Authorization (CoA) on the network device.
RADIUS CoA Port Specifies the default port 3799 if RADIUS CoA is enabled. Change this value only if you defined
a custom port on the network device.
Table 12: Device MAC Authentication Template Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 59