Users Guide

Parameter Description
Validate Server 7. Select the Enable to validate the server certificate check box to validate.
By default, this field is disabled.
NOTE: Checking this option enables the Certificate tab.
Enable Server 8. Select the Enable to fetch endpoints from the server check box to enable the
endpoint context server.
By default, this field is disabled.
NOTE: The Bypass Proxy field is enabled only if you enable this field. Checking this option
enables the Poll Status tab.
Bypass Proxy 9. Select the Enable to bypass proxy server check box to bypass the proxy server.
By default, this field is disabled. You must enable the Enable Server parameter to enable
this field.
You can select this option to specify that the endpoint context server should not use the
configured proxy settings (if a proxy is used). W-ClearPass then bypasses the proxy
server for functions such MDM API, Endpoint Context Server Actions, and Generic HTTP
outbound enforcement.
NOTE: When this field is enabled, the proxy servers configured in the Administration >
Server Manager > Server Configuration > Service Parameters tab > W-ClearPass
System Services service page will be bypassed. The server discovery occurs without any
issues even when the proxy servers are bypassed.
Table 330: Add Endpoint Context Server Parameters (Continued)
Importing an Endpoint Context Server
To import an endpoint context server:
1. Navigate to Administration > External Servers > Endpoint Context Servers.
2. Click the Import link on the top right section of the page.
3. Enter the parameters based on Table 331.
4. Click Import.
Figure 602 displays the Import from File dialog:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 609