Users Guide

Parameter Action/Description
Enter domain details Enter the domain name of the network. For example, @edunet.ucla.com. This field is
mandatory.
Select Vendor Select the vendor of the network device. This field is mandatory.
Authentication
Select Active Directory Select an authentication source from the list, the information updated in the
Authentication, Wireless, and Federation Level Radius Server (FLR) tabs are
auto-populated.
Active Directory Name Enter the hostname or the IP address of the Active Directory server. This field is
mandatory.
Description Enter a description that helps you identify the characteristics of this template. This
field is mandatory.
Server Enter the host name or the IP address of the Active Directory server. This field is
mandatory.
Identity Enter the Distinguished Name (DN) of the administrator account. This field is
mandatory.
NetBIOS Enter the server Active Directory domain name. This field is mandatory.
Base DN Enter the Distinguished Name (DN) of the administrator account. This field is
mandatory.
Password Enter the account password. This field is mandatory.
Port Enter the TCP port where the server is listening for a connection. This field is
mandatory.
Wireless Network Settings
Select wireless controller Select a wireless controller from the drop-down list.
Wireless controller name Enter the name given to the wireless controller.
Controller IPAddress Enter the IP address of the wireless controller.
Vendor Name Select the manufacturer of the wireless controller.
RADIUS Shared Secret Enter the shared secret that is configured on the controllerand inside Policy Manager
to send and receive RADIUS requests.
Enable RADIUSCoA Select to enable RADIUS initiated CoA on the network device.
RADIUS CoA Port Specifies the default port 3799 if RADIUS CoA is enabled. Change this value only if
you defined a custom port on the network device.
Table 13: EDUROAM Service Template Parameters (Continued)
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 61