Users Guide

2. Click Add.
The Add Endpoint Context Server dialog opens. This dialog opens in the Server page.
Figure 624: Adding an Infoblox Endpoint Context Server
3. Enter the following information:
a. Select Server Type: From the drop-down list, select Generic HTTP.
b. Server Name: Enter the IPaddress of the Infoblox server.
c. Server Base URL: As you enter the IPaddress in the Server Name field, the Server Base URL is
populated automatically with the same IPaddress.
d. Password: Enter the password for this server, then verify the password.
4. When finished defining the parameters in the Server page, click Save.
You return to the Endpoint Context Servers page, where the endpoint context server you added is now
listed.
Adding a Context Server Action to the Infoblox Server
This section describes how to define an Infoblox Login action and specify the URLto post content from the
W-ClearPass Policy Manager server to the Infoblox server.
To add a context server action to the Infoblox server:
1. Navigate to Administration > Dictionaries > Context Server Actions.
The Endpoint Context Server Actions page appears.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 631