Users Guide

640 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Authenticating External Devices Against the Infoblox Service
This section defines the configuration on the Infoblox server to receive the MAC address and username
context from W-ClearPass.
The following procedure adds an IPv4 network that is used as a DHCP pool to assign IP addresses to the
external devices that must be authenticated.
To configure an Infoblox server to authenticate external devices:
1. Log into the Infoblox server.
The Infoblox IPAM Tasks page opens.
Figure 638: Infoblox Server Initial Page
2. Select the Data Management tab, then select the DHCP tab.
The DHCP Networks page appears.
Figure 639: Adding an IPv4 Network
3. To add a new network, click the Plus icon.
The Add IPv4 Network Wizard begins.