Users Guide

654 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 661: Specifying the Wireless Service Authentication Settings
4. Specify the following information:
a. Authentication Methods: Select the authentication method.
This example uses EAP MSCHAPv2 as the authentication method.
b. Authentication Sources: Select the authentication source(s).
This example uses [Local User Repository] [Local SQL DB].as the authentication source.
5. Select the Enforcement tab.
Figure 662: Specifying the Enforcement Policy for the Juniper SRXWireless Service
6. From the Enforcement Policy drop-down, select Juniper SRX Policy, then click Next.
The Juniper SRX Wireless Service Summary is displayed.
7. Check the service summary information to make sure the service is correct, make any changes if necessary,
then click Save.
You return to the Services page where the new Juniper SRX Wireless Service is now listed.