Users Guide

Adding a Palo Alto Networks Panorama Endpoint Context Server
Consult Palo Alto Networks' documentation for more information about the parameters that you must enter
to configure this endpoint context server.
To add a Palo Alto Networks Panorama endpoint context server:
1. Navigate to Administration > External Servers > Endpoint Context Servers.
The Endpoint Context Servers page opens.
2. Click Add.
The Add Endpoint Context Server dialog opens.
3. From the Select Server Type drop-down, select Palo Alto Networks Panorama.
The following dialog is displayed:
Figure 669: Add Endpoint Context Server > Palo Alto Networks Panorama Dialog
You can add more than one endpoint context server of the same type. For example, you can add more than one Palo
Alto Networks endpoint context server.
4. Enter the appropriate values for each of the Palo Alto Networks Panorama >Add Endpoint Context
Server parameters described in Table 354.
5. When satisfied with the settings, click Save.
Parameter Description
Select Server Type Choose Palo Alto Networks Panorama from the drop-down list.
Server Name Enter a valid server name. You can enter an IP address or hostname.
Server Base URL Enter the server base URL in the following format: https://{server_ip}
/api/?type=keygen&user={username}&password={password}
Table 354: Add Endpoint Context Server > Palo Alto Networks Panorama Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 663