Users Guide

668 | Administration Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Action/Description
Enable Server 8. Enable Enable Server to fetch endpoints from the server.
Bypass Proxy 9. Enable Bypass Proxy to bypass the proxy server.
10. To save your changes, click Save.
Table 357: Adding a SOTI Endpoint Context Server > Server Parameters (Continued)
Adding a XenMobile Endpoint Context Server
Consult the endpoint manufacturer's documentation for information about the parameters that you must
enter to configure this endpoint. The following figure displays the Add Endpoint Context Server - Server
(XenMobile) tab:
Figure 673: Add Endpoint Context Server - Server (XenMobile) Tab
You can add more than one endpoint context server of the same type. For example, you can add more than one
AirWatch endpoint context server.
The following table describes the Add Endpoint Context Server - Server (XenMobile) tab parameters:
Parameter Description
Select Server Type Choose XenMobile from the drop-down list.
Server Name Enter a valid server name. You can enter an IP address or hostname.
Server Base URL Enter the server base URL in the following format: https://{server_ip}
Table 358: Add Endpoint Context Server - Server (XenMobile) Tab Parameters