Users Guide

The following figure displays the Install Update dialog box:
Figure 698: Install Update Dialog Box
The following table describes the Install Update parameters:
Parameter Action/Description
Reboot 1. To initiate a reboot of the server, click Reboot.
The Reboot button appears only for updates that require a reboot to complete the
installation.
Clear &
Close
2. To delete the log messages and close the dialog, click Clear &Close.
Clear &Close also removes the corresponding row from the Firmware & Patch
Updates table.
To delete the log messages from a failed installation, click Clear & Close.
3. After the log messages are cleared, attempt the installation again.
Close 4. To close the dialog box, click Close.
Table 377: Install Update Parameters
Webservice Operations
System Events (as seen on the Monitoring > Event Viewer page) show records for events, such as
communication failures with Webservice, successful or failed download of updates, and successful or failed
installation of updates.
The W-ClearPass Policy Manager server contacts the Webservice server every hour in the background to
download any newly available Posture & Profile Data updates. The current list of firmware and patch updates
is queried from Webservice every day at a random minute between 4:00 a.m and 5:00 a.m.
Any new list of firmware and update patches that are available are noted by the Policy Manager server
automatically and shown in the userinterface that they are available for download and installation.
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Administration | 697