Users Guide

The following figure displays the Onboard Authorization service template:
Figure 32: Onboard Pre-Authorization Service Template
The following table describes the Onboard Authorization service template parameters:
Parameter Description
General
Select Prefix Select a prefix from the existing list of prefixes or enter the name of a new prefix.
This populates the preconfigured information in the Wireless Network Settings, Device
Access Restrictions, and Provisioning Wireless Network Settings sections. The
Name Prefix field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to identify
services that use templates.
Wireless Network Settings
Wireless Controller
Name
Enter the name of the wireless controller.
Controller IPAddress Enter the wireless controller's IP address.
Vendor Name Select the manufacturer of the wireless controller.
RADIUS Shared Secret Enter the shared secret that is configured on the controller and inside Policy Manager to
send and receive RADIUS requests.
Enable RADIUSCoA Select to enable RADIUS initiated CoA (Change of Authorization) on the network device.
RADIUS CoA Port Specifies the default port 3799 if RADIUS CoA is enabled.
NOTE: Change this value only if you defined a custom port on the network device.
Device Access Restrictions
Days allowed for
access
Select the days of the week that guest users are allowed network access.
Table 20: Onboard Authorization Service Template Parameters
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 71