Users Guide

72 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Parameter Description
Provisioning Wireless Network Settings
Wireless SSIDfor
Onboard Provisioning
Enter the SSID of your network.
Add New Onboard
Network Settings
Click the Add New Onboard Network Settings link to launch the Web UIto modify the
Onboard network settings.
Table 20: Onboard Authorization Service Template Parameters (Continued)
Configuring Policy Manager Services
You can configure the following types of services in W-ClearPass Policy Manager:
l Dell 802.1X Wireless Service on page 85
l 802.1X Wireless—Identity Only Service on page 84
l 802.1X Wired Service on page 72
l 802.1X Wired—Identity Only Service on page 73
l Cisco Web Authentication Proxy Service on page 95
l MAC Authentication Service on page 96
l RADIUS Authorization Service on page 97
l RADIUS Enforcement (Generic) Service on page 98
l RADIUS Proxy Service on page 98
l Dell W-Series Application Authentication Service on page 99
l Dell W-Series Application Authorization Service on page 100
l W-ClearPass OnConnect Enforcement Service on page 100
l Event-Based Enforcement Service on page 102
l TACACS+ Enforcement Service on page 104
l Web-Based Authentication Service on page 107
l Web-based Health Check Only Service on page 111
l Web-Based Open Network Access Service on page 116
802.1X Wired Service
Configure this service for clients connecting through an Ethernet LAN with authentication using IEEE 802.1X.
Except for the NAS-Port-Type service rule value (which is Ethernet for an 802.1X Wired service and Wireless
802.11 for an 802.1X Wireless service), configuration for the rest of the tabs is similar to the Dell 802.1X
Wireless service.
For more information, see Dell 802.1X Wireless Service on page 85.
The following figure displays the Add 802.1X Wired Service page: