Users Guide

732 | Configuring Processing for Ingress Events Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 724: Enabling an Ingress Events Dictionary
3. To enable the selected ingress events dictionary, click Enable.
You return to the Ingress Events Dictionaries page. The dictionary information is no longer displayed in red
and the Status column is set to Enabled.
Configuring the Ingress Event Sources
The Event Source is the device that sends Syslog events to W-ClearPass. Any events sent that are not from
configured event sources are ignored.
To configure the Event Source (in this example, a Juniper Networks SRX gateway):
1. Navigate to Configuration > Network > Event Sources.
The Event Sources page opens.
2. To add the Event Source for the desired vendor, click Add.
The Add Events Source dialog opens.