Users Guide

78 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
The Authorization tab is not displayed by default. To access this tab, select the More Options >
Authorization check box.
W-ClearPass fetches role-mapping attributes from the authorization sources associated with the service,
regardless of which authentication source was used to authenticate the user.
For a given service, role-mapping attributes are fetched from the following authorization sources:
l Authorization sources associated with the authentication source
l Authorization sources associated with the service
The following figure displays the Authorization dialog:
Figure 38: Add Dell 802.1X Wireless Service > Authorization Dialog
2. Specify the Authorization parameters as described in the following table:
Table 23: Add Dell 802.1X Wireless Service > Authorization Parameters
Parameter Action/Description
Authentication Source Displays the authorization sources from which role mapping attributes are fetched for
each authentication source.
Attributes Fetched From Displays the source of attributes.
Additional authorization
sources from which to
fetch role-mapping
attributes
Specify the authorization sources using the Select to Add field.
This can be one or more instances of the following list of authorization sources:
l Admin User Repository
l avenda313 [Active Directory]
l Blacklist User Repository
l Endpoints Repository
l Guest Device Repository
l Guest User Repository
l Insight Repository
l Local User Repository
l Onboard Devices Repository
l Social Login Repository
l Time Source
NOTE: When you attempt to specify more than 23 Services authorization sources, the
following error message is displayed: No.of Authorization Sources cannot exceed
23.
For more information on configuring authorization sources, see Adding and Configuring Authentication
Methods on page 183.