Users Guide

Roles Configuration
Use the Roles tab to associate a role-mapping policy with this service.
The following figure displays the Dell 802.1X Wireless Service > Roles dialog:
Figure 39: Add Dell 802.1X Wireless Service > Roles Dialog
1. Specify the Roles parameters as described in the following table:
Parameter Action/Description
Role Mapping Policy Select a role mapping policy from the drop-down list.
Policy Manager ships a number of preconfigured roles.
NOTE: A service can be configured without a role-mapping policy, but only one
role-mapping policy can be configured for each service.
Role Mapping Policy Details
Description Provide additional information about the selected role-mapping policy.
Default Role Specify the role to which Policy Manager defaults when the role-mapping policy
does not produce a match.
Rules Evaluation Algorithm Shows the first matched rule.
Table 24: Add Dell 802.1X Wireless Service > Roles Tab Parameters
For information on configuring role-mapping policies, see Configuring a Role and Role-Mapping Policy on page
272.
Posture Configuration
The Posture tab is not enabled by default. To enable posture checking for this service:
1. Select the More Options > Posture Compliance check box.
You can enable the posture checking for this kind of service, if you deploy any of the following:
n W-ClearPass Policy Manager in a Microsoft Network Access Protection (NAP)
n Cisco Network Admission Control (NAC) Framework environment
n Dell hosted captive portal that performs posture checks through a dissolvable agent
The Posture tab cannot be enabled when High Capacity Guest mode is enabled in the W-ClearPass cluster.
The following figure displays the Posture dialog:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Services | 79