Users Guide

818 | W-ClearPass Insight Reports Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 803: Insight Read-Only Administrator Admin Privileges
As shown in Figure 803, the default admin privileges for the Insight Read-only Administrator specifies Read-
only access to all of the Insight modules—Dashboard, Reports, Alerts, and Administration.
Defining Custom Insight Admin Privileges
As described above, W-ClearPass provides a default Read-only Administrator. The default sets of admin
privileges cannot be modified.
When a different set of admin privileges is needed (for example, if you require different admin privileges for
the Report module than the admin privileges defined for the other Insight modules), you must create a new
admin privileges administrator.
Insight privileges can be defined from two locations:
l Operator Profiles in W-ClearPass Guest
l Admin Privileges in W-ClearPass
To define custom admin privileges for Insight:
1. Navigate to Administration > Users and Privileges > Admin Privileges.
The Admin Privileges page opens.
2. Click the Add link.
The Add Admin Privileges dialog opens.