Users Guide

836 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
network traceroute6
Use the network traceroute6 command to print the route taken to reach the IPv6 network host.
Syntax: network traceroute6
network traceroute6 <host>
The following table describes the required and optional parameters for the network traceroute6 command:
Flag/Parameter Description
<host> Specifies the name of network host. You can specify the host with an IPv6 address.
Table 423: Network Traceroute6 Command Parameters
Example
The following example prints the route taken to reach the network host:
[appadmin]# network traceroute6 sun.us.dellnetworks.com
network traceroute
Use the network traceroute command to print the route taken to reach the network host.
Syntax: network traceroute
network traceroute <host>
The following table describes the required parameter for the network traceroute command:
Flag/Parameter Description
<host> Specifies the name of the network host.
Table 424: Network Traceroute Command Parameters
Example
The following example prints the route taken to reach the network host:
[appadmin]# network traceroute sun.us.dellnetworks.com
Miscellaneous Commands
The Policy Manager command line interface includes the following miscellaneous commands:
l ad auth on page 837
l ad netjoin on page 837
l ad netleave on page 838
l ad passwd-server
l ad testjoin on page 839
l alias on page 839
l backup on page 840
l dump certchain on page 841