Users Guide

l dump logs on page 841
l dump servercert on page 842
l exit on page 842
l help on page 842
l krb auth on page 843
l krb list on page 843
l ldapsearch on page 843
l quit on page 844
l restore on page 844
ad auth
Use the ad auth command to authenticate the user against Active Directory.
Syntax
ad auth <username> -n <domain NetBIOS name>
The following table describes the parameters for the ad auth command:
Flag/Parameter Description
<username> Specifies the username of the authenticating user. This is a mandatory parameter.
<domain NetBIOS
name>
Specifies the domain name. This field is optional.
Table 425: AD Auth Command Parameter
Example
The following example authenticates the user against Active Directory:
[appadmin]# ad auth jbrown -n cppm.sanfran1
ad netjoin
Use the ad netjoin command to join the host to the domain.
Syntax
ad netjoin <domain-controller.domain-name> [domain NetBIOS name] [domain REALM name]
[ou=<object container>]
The following table describes the parameters for the ad netjoin command:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Command Line Interface | 837