Users Guide

l Reset the password servers.
Syntax
ad passwd-server <server> <list> <reset>
Flag/Parameter Description
set
l -n <domain NetBIOS name>
l -s <Server1> [Server2 Server3
Server4 ...]
Sets the password servers.
The -n parameter specifies the domain name.
The -s parameter specifies one or more password server names.
list -n <domain NetBIOS name> Lists the configured password servers.
reset -n <domain NetBIOS name> Resets the password servers.
Table 428: AD passwd-server Command Parameters
Example
The following example sets the configured password servers:
[appadmin]# ad passwd-server set -n balsamcollege.edu -s cppm.campus1
ad testjoin
Use the ad testjoin command to test if the ad netjoin command succeeded. This command also tests
whether Policy Manager is a member of the Active Directory domain.
Syntax
ad testjoin <domain NetBIOS name>
Flag/Parameter Description
<domain NetBIOS name> Specifies the host to be joined to the domain. This field is mandatory.
Table 429: AD Netjoin Command Parameter
Example
The following example tests if the ad testjoin command succeeded:
[appadmin]# ad testjoin balsamcollege.edu
alias
Use the alias command to create or remove aliases.
Syntax
alias <name>=<command>
The following table describes the parameters for the alias command:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Command Line Interface | 839