Users Guide

Flag/Parameter Description
<license-key> Specifies the newly issued license key. This field is mandatory.
Table 441: System Install-License Command Parameter
Example
The following example replaces the current license key with a new one:
[appadmin]# system install-license API11-3117-90982-007
system morph-vm
Use the system morph-vm command to convert an evaluation virtual machine (VM) to a production virtual
machine .
With this command, licenses are still required to be installed after the morph operation is completed.
To convert an evaluation virtual machine to a production virtual machine:
1. Determine the type of the appliance to which you want to morph your evaluation virtual machine .
2. Procure the license for the target virtual appliance.
3. Shut down the virtual machine.
4. Determine the required capacity of an additional hard disk and attach it to the target virtual appliance.
5. Adjust the CPU and Memory settings for the evaluation virtual machine to match the target virtual
appliance.
6. Boot the virtual machine.
7. Execute the system morph-vm command.
The configuration data from the evaluation virtual machine will be migrated to the newly-attached disk. The
node will reboot as a virtual machine of the selected appliance model.
8. Log in to the user interface and enter the permanent license.
The evaluation virtual machine is now a production virtual machine .
Syntax
system morph-vm <CP-VA-500 | CP-VA-5K | CP-VA-25K>
The following table describes the parameters for the system morph-vm command:
Flag/Parameter Description
<vm-version> This is the updated W-ClearPass version of the virtual appliances. The following
options are available:
l CP-VA-500
l CP-VA-5K
l CP-VA-25K
This field is mandatory.
Table 442: System Morph-VM Command
Example
The following example converts an evaluation virtual machine to a production CP-25K virtual appliance:
Dell Networking W-ClearPass Policy Manager 6.6 | User Guide Command Line Interface | 859