Users Guide

86 | Services Dell Networking W-ClearPass Policy Manager 6.6 | User Guide
Figure 47: Add Dell 802.1X Wireless Service > Service Dialog
1. Specify the Service tab parameters as described in the following table:
Parameter Action/Description
Type Select a service from the drop-down list that defines what type of service can be
configured.
Name Enter the name of the service.
Description Provide additional information that helps to identify the service.
Monitor Mode Select this check box to monitor network access activity without enforcement.
More Options Check these boxes to access the additional configuration tabs:
l Authorization
l Posture Compliance
Service Rule
Type Select the service rule type.
Name Select the name of the service rule from the drop-down list.
Operator Select an appropriate operator from the list of operators for the data type of the
attribute.
For example, you can select from BELONGS_TO, NOT_BELONGS_TO, CONTAINS, or
EQUALS.
Value Select the value from the drop-down list. The value list depends on the operator
selected.
Table 30: Add Dell 802.1X Wireless Service > Service Tab Parameters