Administrator Guide

l Other EAP methods, while possible, are limited in their applicability and should only be used if you have a
specific requirement for that method.
The Windows EAP options that may be specified include:
l Enable Fast Reconnect – Fast Reconnect is a PEAP property that enables wireless clients to move between
wireless access points on the same network without being re-authenticated each time they associate with a
new access point. If TLS is selected, Fast Reconnect is not available.
l Enforce Network Access Protection– Enable this option to obtain a system statement-of-health (SSoH)
from the OnGuard or Microsoft NAP Agent and send it to the authentication server during the 802.1X
authentication process. Use this option to enforce network access control (NAC) protections on the
network. If TLS is selected, Enforce Network Access Protection is not available.
l Enforce Cryptobinding – Cryptobinding is a process that protects the authentication protocol negotiation
against man-in-the-middle attacks. The cryptobinding request and response performs a two-way
handshake between the peer and the authentication server using key materials. If TLS is selected, Enforce
Cryptobinding is not available.
The Ubuntu EAP field lets you configure the authentication protocol to use when configuring an Ubuntu
device. Options include:
l TLS
l PEAP with MSCHAPv2
When you have completed your selections on this tab, do one of the following:
l Click Previous to return to the Access tab.
l Click Next to continue to the Authentication tab.
l Click Save Changes to make the new network configuration settings take effect.
l Click Cancel to discard your changes and return to the main Onboard configuration user interface.
For information about the list of network settings, see "Network Settings " on page 141. For more information
about configuration profiles, see "Configuration Profiles" on page 184
Configuring Device Authentication Settings
On the Onboard > Configuration >Network Settings form, click the Authentication tab to display the
Enterprise Authentication form.
1. Select one of these options in the iOS & OS X Credentials drop-down list:
Dell Networking W-ClearPass Guest 6.5.0 | User Guide Onboard | 147