Administrator Guide
Configuring an iOS Device Passcode Policy
Passcode policy settings are typically used when you provision a corporate-owned device, or when a user is
given remote access to sensitive information. Passcode policy settings you define can be used in configuration
profiles for an iOS device. You can define multiple passcode policy settings.
Passcode policy settings are only supported by iOSdevices; they are ignored by all other device types.
To configure a passcode policy:
1. Go to Onboard > Configuration > iOS Settings. Either click an existing passcode policy setting's name in
the list; or click Add New, select Passcode Policy Settings in the Settings Type drop-down list, and click
Create. The Passcode Policy Settings form opens.
2. In the Name field, give the passcode policy a short name that identifies it clearly. Passcode policy names
can include spaces.
If you are duplicating a passcode policy, the original name has "Copy" appended to it. You may highlight this
name and replace it with a new name.
3. In the Description field, briefly describe the characteristics of the passcode policy.
4. To require the user to create a passcode, mark the check box in the Force PIN field.
5. If the passcode will not need restrictions on repeated or sequential characters, you can mark the check box
in the Allow Simple field.
6. If the passcode must include alphabetic characters in addition to numbers, mark the check box in the
Require Alphanumeric field.
Dell Networking W-ClearPass Guest 6.5.0 | User Guide Onboard | 171