Administrator Guide

Configuring App Sets
App sets you define let you specify an app or group of apps to be installed during device provisioning, and
whether an app requires the device to be restarted after provisioning.
To configure an app set:
1. Go to Onboard > Configuration >Windows Applications, and then either click the Edit link for and app
set in the list, or click the Create new app set link in the upper-right corner. The App Set form opens.
2. In the Name field, give the app set a short name that identifies it clearly. App set names can include spaces.
If you are duplicating an app set, the original name has "Copy" appended to it. You may highlight this name
and replace it with a new name.
3. In the Description field, briefly describe the characteristics of the app set.
4. In the Windows Applications area, apps you have downloaded through the Content Manager are listed in
the Installers field.
l To specify that an app should be installed during provisioning, mark its Install application check box.
l To specify that the device needs to be restarted after the app is installed, mark its Requires restart
check box.
5. Click Save Changes. The app set is available as a configuration unit on the Configuration Profile form.
To add or manage apps in Content Manager, click the Content Manager link above the form. You can
download apps to your system as content items, then upload them to the Content Manager.
For more information about configuration profiles, see "Configuration Profiles" on page 184
Dell Networking W-ClearPass Guest 6.5.0 | User Guide Onboard | 183