Administrator Guide

l Edit – changes the properties of the specified operator profile
l Delete – removes the operator profile from the Operator Profiles list
l Duplicate – creates a copy of an operator profile
l Create Operator – opens the Create Operator Login form, allowing you to create a new operator
login associated with the selected operator profile.
l Show Operators – shows a list of operator login names associated with that operator profile
l Show Usage – opens a window in the Operator Profiles list that shows if the profile is in use, and lists
any LDAP authentication servers, LDAP translation rules, and operator logins associated with that profile.
Each entry in this window appears as a link to the form that lets you edit that LDAP or operator login
setting.
Configuring AirGroup Operator Device Limit
By default, an AirGroup operator can create up to five personal devices. To change this default:
1. Go to Administration > Operator Logins > Profiles, then select the AirGroup Operator profile in the
list.
2. Click the Edit link. The Edit Operator Profile form opens.
3. In the Account Limit field, specify an appropriate value. This is the maximum number of personal devices
that an operator with this profile can create.
4. Click Save Changes.
You can create a set of operator profiles and configure each profile with a different account limit. This makes it
easy to assign operator profiles appropriately for small groups, larger groups, or events. To create each profile
in the set, duplicate the built-in AirGroup Operator profile, and update the Account Limit field in the new
profile.
Local Operator Authentication
W-ClearPass Policy Manager profiles and W-ClearPass Guest profiles are different. To create a W-ClearPass
Guest operator login, local users are first defined in W-ClearPass Policy Manager with a role that matches an
operator profile in Guest, then rules are used to map the role to the Guest operator profile.
Creating a New Operator
To create a new operator or administrator for W-ClearPass Guest or AirGroup, some steps are performed in
W-ClearPass Policy Manager (CPPM), and some steps are performed in W-ClearPass Guest, as described below:
1. Create an operator profile in W-ClearPass Guest, or use an existing one. See "Operator Profiles" on page
546.
l To create an AirGroup user, choose either the AirGroup Administrator or AirGroup Operator profile,
as appropriate. These profiles are automatically included in W-ClearPass Guest when the AirGroup
Services plugin is installed.
l MACTrac users are created entirely in CPPM.
Dell Networking W-ClearPass Guest 6.5.0 | User Guide Operator Logins | 553