Administrator Guide

72 | W-ClearPass Guest Manager Dell Networking W-ClearPass Guest 6.5.0 | User Guide
AirGroup Device Registration
AirGroup allows users to register their personal mobile devices on the local network and define a group of
friends or associates who are allowed to share them. If AirGroup Services is enabled, AirGroup administrators
can provision their organization’s shared devices and manage access, and AirGroup operators can register and
provision a limited number of their own personal devices for sharing. For complete AirGroup deployment
information, refer to the AirGroup sections in the Dell Networking W-Series ArubaOSUser Guide and the
W-ClearPass Policy Manager documentation.
Registering Groups of Devices or Services
This functionality is only available to AirGroup administrators.
To register and manage an organization’s shared devices and configure device access, log in as the AirGroup
administrator and go to Guest > Create Device. The Register Shared Device form opens.
1. In the Device Name field, enter the name used to identify the device.
2. In the Device Type field, use the drop-down list to select the device type.
3. In the MAC Address field, enter the device’s MAC address.
4. In the Shared Locations field, enter the locations where the device can be shared. To allow the device to
be shared with all locations, leave this field blank.
Each location name may not exceed 64 characters. A maximum of 100 location names may be entered. The
maximum character limit for the list is 1000 characters (including comma separators).
Each location is entered as a tag=value pair describing the MAC address of the access point (AP) closest to
the registered device. Use commas to separate the tag=value pairs in the list. Tag=value pair formats are
shown in the following table: