Administrator Guide

94 | Onboard Dell Networking W-ClearPass Guest 6.5.0 | User Guide
To configure a CRL, you will need to provide its URL to your network equipment. This URL can be constructed
by using the relative path mdps_crl.php?id=1.
For example, if the Onboard server’s hostname is onboard.example.com, the location of the CRL is:
http://onboard.example.com/guest/mdps_crl.php?id=1.
A certificate revocation list does not require the use of HTTPS and can be configured to use HTTP.
Network Architecture for Onboard
The high-level network architecture for the Onboard solution is shown in the following figure.
Figure 12 W-ClearPass Onboard Network Architecture
The sequence of events shown in Figure 12 is:
1. Users bring their own device to the enterprise.
2. The Dell Networking W-ClearPass Onboard workflow is used to provision the user’s device securely and with
a minimum of user interaction.
3. After it is provisioned, the device re-authenticates to the network using a set of unique device credentials.
These credentials uniquely identify the device and user and enable management of provisioned devices.
4. Administrators can configure all aspects of the provisioning workflow – including the devices that have been
provisioned, policies to apply to devices and the overall user experience for BYOD.
A more detailed view of the network architecture is shown in Figure 13. This diagram shows different types of
client devices using the Onboard workflow to gain access to the network. Some of the components that may
be configured by the network administrator are also shown.