Deployment Guide

130 | Resetting Onboard Certificates and Configuration
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
To enable the passcode policy on all iOS devices, mark the Enable passcode policy check box and configure the
remaining options according to your enterprise’s security requirements.
Click the Save Changes button to save the passcode policy settings and return to the main Onboard configuration
user interface.
Resetting Onboard Certificates and Configuration
To delete certificates, re-create the Onboard Web login page, or reset configuration to factory default settings, go to
Onboard > Reset to Factory Defaults, or click the Reset to Factory Defaults command link. The Reset to Factory
Defaults page opens.
This page is used to delete certificates, or restore the default configuration for Onboard. These options are useful
while trailing the Onboard workflow with a set of test devices.