Deployment Guide

134 | Configuring ClearPass Guest Authentication
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
Configuring ClearPass Guest Authentication
You can use the Configuration module to modify authentication settings for the Dell Networking W-ClearPass
Guest application.
To configure ClearPass Guest’s authentication settings:
1. Go to Configuration > Authentication. The Authentication Settings form opens.
2. To send automatic disconnect or re-authorization messages when enabled or role values change, mark the check
box in the Dynamic Authorization row. This requires a network access server (NAS) type that supports RFC-
3576.
3. In the NAS Type row, use the drop-down list to choose the default type for network access servers.
4. To force a specific bind address for RFC-3576 requests, enter a value in the RFC-3576 Bind Address row. This
might be needed in an AirGroup environment.
5. In the Internal Auth Type row, choose a type from the drop-down list. Choices in list include PAP, CHAP, and
MS-CHAP. The internal authentication type controls the RADIUS authentication used for internal RADIUS
requests.
6. To redirect HTTP access to use HTTPS instead, mark the check box in the Security row.
Content Manager
The Content Manager allows you to upload content items to Dell Networking W-ClearPass Guest. Content items
are assets such as text, images, and animations that are made available for guest access using the application’s built-
in Web server. To work with your content items, go to Configuration > Content Manager.
You can add content items by using your Web browser to upload them. You can also copy a content item stored on
another Web server by downloading it.