Deployment Guide

The Enable visitor access self-provisioning check box must be ticked for self-provisioning to be available.
The Require HTTPS field, when enabled, redirects guests to an HTTPS connection for greater security.
The Service Not Available Message allows a HTML message to be displayed to visitors if self-provisioning has been
disabled. See "Smarty Template Syntax" on page 264 in the Reference chapter for details about the template syntax
you may use to format this message.
Click the Save Changes button after you have entered all the required data.
Captive Portal Integration
To start the visitor self-provisioning process, new visitor registration is performed by redirecting the visitor to the
URL specified on the Hotspot Preferences page; for example: https://guest.spiffywidgets.com/hotspot_plan.php. The
Hotspot Sign-Up page opens to the first page of the wizard, Choose Plan.
The hotspot_plan.php page accepts two parameters:
l The source parameter is the IP address of the customer.
l The destination parameter is the original URL the customer was attempting to access (that is, the customer’s
home page). This is used to automatically redirect the customer on successful completion of the sign-up process.
For browsers without JavaScript, you may use the <noscript> tag to allow customers to sign up:
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide Captive Portal Integration | 205