Reference Guide

3. 802.1x Service Setup
The CPPM profiles are applied globally but they must be referenced in an enforcement policy that is
associated with a Service to be evaluated. Each Enforcement Profile can have an associated group of
Network Access Devices (NADs).
Service setup requires a set of rules known as Enforcement Profiles. One profile will return VLAN 999
and one will return a Cisco DACL.
Adding Enforcement Profiles
VLAN 999
Navigate to Configuration->Enforcement->Profiles.
Figure 1 CPPM Enforcement Profiles
Click Add Enforcement Profile in the top right corner of the page.
Enter the profile properties from Figure 1 Adding a new 802.1x Enforcement Profile below.
16 | ClearPass Policy manager Cisco Switch Setup with CPPM