Users Guide

209 Dell Networking W-ClearPass Policy Manager 6.2 | User Guide
Table 115: Device tab
Container Description
Name/ Description Specify identity of the device.
IP Address or
Subnet
Specify the IP address or the subnet (E.g., 192.168.5.0/24) of the device.
RADIUS/TACACS+
Shared Secret
Enter and confirm a Shared Secret for each of the two supported request protocols.
Vendor Optionally, specify the dictionary to be loaded for this device.
NOTE: RADIUS:IETF, the dictionary containing standard the set of RADIUS
attributes, is always loaded.
When you specify a vendor here, the RADIUS dictionary associated with this
vendor is automatically enabled.
Enable RADIUS
CoA
RADIUS CoA Port
Enable RADIUS Change of Authorization (RFC 3576/5176) for this device.
Set the UDP port on the device to send CoA actions. Default value is 3799.
Attributes Add custom attributes for this device. Click on the “Click to add...” row to add
custom attributes. By default, four custom attributes appear in the Attribute
dropdown: Location, OS-Version, Device-Type, Device-Vendor. You can enter any
name in the attribute field. All attributes are of String datatype. The value field can
also be populated with any string. Each time you enter a new custom attribute, it is
available for selection in Attribute dropdown for all devices.
NOTE: All attributes entered for a device are available in the role mapping rules
editor under the Device namespace.
Add/Cancel Click Add to commit or Cancel to dismiss the popup.
Figure 206 SNMP Read/Write Settings tabs