Users Guide

Figure 207 SNMP Read/Write Settings tabs - SNMP v3 Details
Table 116: SNMP Read/Write Settings tabs
Container Description
Allow SNMP
Read/Write
Toggle to enable/disable SNMP Read/Write.
Default VLAN
(SNMP Write
only)
VLAN port setting after SNMP-enforced session expires.
SNMP
Read/Write
Setting
SNMP settings for the device.
Community
String (SNMP
v2 only)
Force Read
(SNMP v1
and v2 only)
Enable this setting to ensure that all CPPM nodes in the cluster read SNMP information
from this device regardless of the trap configuration on the device. This option is
especially useful when demonstrating static IP-based device profiling because this does
not require any trap configuration on the network device.
Read ARP
Table Info
Enable this setting if this is a Layer 3 device, and you intend to use the ARP table on this
device as a way to discover endpoints in the network. Static IP endpoints discovered this
way are further probed via SNMP to profile the device.
Username
(SNMP v3
only)
Admin user name to use for SNMP read/write operations
Authentication
Key (SNMP
v3 only)
SNMP v3 with authentication option (SHA & MD5)
Privacy Key
(SNMP v3
only)
SNMP v3 with privacy option
Privacy
Protocol
(SNMP v3 w/
privacy only)
Choose one of the available privacy protocols:
l DES-CBC
l AES-128
Add/Cancel Click Add to commit or Cancel to dismiss the popup.
Dell Networking W-ClearPass Policy Manager 6.2 | User Guide 210