Users Guide

211 Dell Networking W-ClearPass Policy Manager 6.2 | User Guide
In large or geographically spread cluster deployments you do not want all CPPM nodes to probe all SNMP configured
devices. The default behavior is for a CPPM node in the cluster to read network device information only for devices
configured to send traps to that CPPM node.
Figure 208 CLI Settings tab
Table 117: CLI Settings tab
Container Description
Allow CLI Access Toggle to enable/disable CLI access.
Access Type Select SSH or Telnet. Policy Manager uses this access method to log into the
device CLI.
Port SSH or Telnet TCP port number.
Username/Password Credentials to log into the CLI.
Username Prompt
Regex
Regular expression for the username prompt. Policy Manager looks for this
pattern to recognize the telnet username prompt.
Password Prompt
Regex
Regular expression for the password prompt. Policy Manager looks for this
pattern to recognize the telnet password prompt.
Command Prompt
Regex
Regular expression for the command line prompt. Policy Manager looks for this
pattern to recognize the telnet command line prompt.
Enable Prompt
Regex
Regular expression for the command line "enable" prompt. Policy Manager looks
for this pattern to recognize the telnet command line prompt.
Enable Password Credentials for "Enable" in the CLI
Add/Cancel Click Add to commit or Cancel to dismiss the popup.