Administrator Guide

110 | Services Dell Networking W-ClearPass Policy Manager 6.5 |User Guide
Encrypted Wireless Access via 802.1X Public PEAP method
This template is designed for providing encrypted wireless access to users using fixed 802.1X PEAP credentials.
This template configures an EAP PEAP Public type authentication method and creates enforcement policy for
network access.
The following figure displays the Encrypted Wireless Access via 802.1X Public PEAP method service
template:
Figure 62: Encrypted Wireless Access via 802.1X Public PEAP method Service Template
The following table describes the parameters used in the Encrypted Wireless Access via 802.1X Public
PEAP method service template:
Parameter Description
General
Name Prefix Enter a prefix that you want to append to services using this template. You can use this to
identify services that use templates.
Wireless Network Settings
Select wireless
controller
Select a wireless controller from the drop-down list.
Wireless controller
name
Enter the name given to the wireless controller.
Controller
IPAddress
Enter the IP address of the wireless controller.
Vendor Name Select the manufacturer of the wireless controller.
RADIUS Shared
Secret
Enter the shared secret that is configured on the controller and inside Policy Manager to
send and receive RADIUS requests.
Enable RADIUSCoA Select to enable RADIUS initiated CoA on the network device.
RADIUS CoA Port Specifies the default port 3799 if RADIUS CoA is enabled. Change this value only if you
defined a custom port on the network device.
Authentication Method
Public Username Enter public username for EAP PEAP Public type authentication method.
Table 41: Encrypted Wireless Access via 802.1X Public PEAP Method Service Template Parameters