Administrator Guide

Parameter Description
Fast
Reconnect
Enable this check box to allow fast reconnect. When fast reconnect is enabled, the inner method
that happens inside the server authenticated outer tunnel is also bypassed. This makes the process
of re-authentication faster. For the fast reconnect to work, session resumption must be enabled.
Public
Username
Enter the Guest username. In this context, enter 'public'.
Public
Password
Enter the Guest password. In this context, enter 'public'.
Table 67: EAP-PEAP-Public - General Tab Parameters (Continued)
Inner Methods
The Inner Methods tab controls the inner methods for the EAP-PEAP-Public authentication method. The
following figure is an example of the EAP-PEAP-Public - Inner Methods tab:
Figure 108: EAP-PEAP-Public - Inner Methods Tab
The EAP-MD5 authentication method is not supported if you use Dell Networking W-ClearPass Policy Manager in the
FIPS (Administration > Server Manager > Server Configuration > FIPS tab) mode.
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Authentication and Authorization | 159