Administrator Guide

252 | Posture Dell Networking W-ClearPass Policy Manager 6.5 |User Guide
The following table describes the Patch Management parameters:
Interface
Parameter
Description
Patch Management Page l A patch management
application is on
l Auto Remediation
l User Notification
l Uncheck to allow any
product
l Check the A patch management application is on
to enable testing of health data for configured
Antivirus application(s).
l Check the Auto Remediation check box to enable
auto remediation of patch management status.
l Check the User Notification check box to enable
user notification of policy violation of patch
management status.
l Clear Uncheck to allow any product check box to
check whether any patch management application
(any vendor) is running on the end host.
Patch Management Page
(Detail 1)
l Add
l Trashcan icon
l To configure patch management application
attributes for testing against health data, click Add.
l To remove configured patch management
application attributes from the list, click the
trashcan icon in that row.
Patch Management Page
(Detail 2)
Product/Version
Configure settings for which to test against health data.
All checks might not be available for some products.
Where checks are not available, they are shown in
disabled state on the UI.
l Select Patch Management product: Select a
vendor. This option is only enabled if the Product-
specific checks check box is checked.
l Product version is at least: Enter version number.
This option is only enabled if the Product-specific
checks check box is checked.
l Status Check Type: Select this field to check
whether Patch Agent is enabled or not. Dell
Networking W-ClearPass Policy Manager server
compares the Patch Agent Status sent by OnGuard
Agent with the configured value. If the Patch Agent
Status value is different from configured value, then
client is treated as unhealthy. If Auto-remediation is
enabled, then OnGuard Agent changes the Patch
Agent Status on client to the configured value. Select
any of the following options:
n No Check - Dell Networking W-ClearPass Policy
Manager server ignores Patch Agent Status
value. This means it will not check status of Patch
Agent application on client.
n Enabled - Patch Agent is turned on and
automatically update the client.
n Disabled - Patch Agent is disabled and it will not
check for missing patches and update the client.
n Notify Before Download - Patch Agent is turned
on and will notify user before downloading
updates.
Table 131: Patch Management Page Parameters