Administrator Guide

300 | Enforcement Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
Figure 269: Add Enforcement Policy - Enforcement tab
The following table describes the Add Enforcement Policy - Enforcement tab parameters:
Parameter Description
Name/Description Freeform label and description.
Type Select: RADIUS, TACACS+, WebAuth (SNMP/CLI)/CoA or Application. Based on this
selection, the Default Profile list shows the right type of enforcement profiles in the drop-
down list (See Below).
NOTE: Web-based Authentication or WebAuth (HTTPS) is the mechanism used by
authentications performed via a browser, and authentications performed via Dell W-
OnGuard. Both SNMP and CLI (SSH/Telnet) based Enforcement Profiles can be sent to the
network device based on the type of device and the use case.
Default Profile An enforcement policy applies conditions (roles, health and time attributes) against specific
values associated with those attributes to determine the enforcement profile. If none of the
rules matches, Policy Manager applies the default profile.
Click Add new Enforcement Profile to add a new profile (This is integrated into the flow.
After you create a profile, Policy Manager brings you back to the current tab.)
Table 159: Add Enforcement Policy - Enforcement Tab Parameters
In the Rules tab, click New Rule to display the Rules Editor:
Figure 270: Add Enforcement Policy (Rules Tab)