Administrator Guide

The following table describes the RADIUS Based Enforcement Profile tab parameters:
Parameter Description
Template Select the template from the drop-down list. In this context, select RADIUS Based Enforcement.
Name Enter the name of the profile. The name is displayed in the Name column on the Configuration
> Enforcement > Profiles page.
Description Enter a description of the profile. The Description is displayed in the Description column on the
Configuration > Enforcement > Profiles page.
Type RADIUS. The field is populated automatically.
Action Enabled. Click Accept, Reject or Drop to define the action taken on the request.
Device Group
List
Select a Device Group from the drop-down list. The list displays all configured Device Groups.
All configured device groups are listed in the Device GroupsConfiguration > Network >
Device Groups page. After you add one or more device group(s), you can select a group and
take one of the following actions:
l Click Remove to delete the selected Device Group List entry
l Click View Details to see the device group parameters
l Click Modify to change the parameters of the selected device group
Add new Device
Group
To add a new a device group, click the Add new
Device Group
link and see
Adding and
Modifying Device Groups on page 353
.
Table 183: RADIUS Based Enforcement Profile Tab Parameters
Attributes Tab
The following figure displays the RADIUS Based Enforcement - Attributes tab:
Figure 312: RADIUS Based Enforcement Attributes Tab
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Enforcement | 333