Administrator Guide

The following table describes the Radius Change of Authorization (CoA) - Profile tab parameters:
Parameter Description
Template Select from:
l Cisco-Disable-Host-Port
l Cisco - Bounce-Host-Port
l Cisco - Reauthenticate-Session
l HP - Change-VLAN
l HP - Generic-CoA
l Aruba - Change-User-Role
l IETF - Terminate-Session-IETF
l Aruba - Change-VPN-User-Role
l IETF- Generic-CoA-IETF
Type
Select one of the following attribute types:
l Radius:Aruba
l Radius:IETF
l Radius:Cisco
l Radius:Microsoft
l Radius:Avenda
For more information, see RADIUS Namespaces on page 610
Name
The options displayed for the Name Attribute depend on the RADIUS CoA Template selected
and the Type Attribute that were selected.
Value
The options displayed for the Value Attribute depend on the RADIUS CoA Template selected
and the Type Attribute that were selected.
Type RADIUS_CoA. The field is populated automatically.
Action Disabled.
Device Group
List
Select a Device Group from the drop-down list. The list displays all configured Device Groups.
All configured device groups are listed on the Device Groups page: Configuration > Network
> Device Groups. After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see Adding and
Modifying Device Groups on page 353.
Table 185: Radius Change of Authorization (CoA) Profile Tab Parameters
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Enforcement | 335