Administrator Guide

342 | Enforcement Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
Profile Tab
The following figure displays the TACACS+ Based Enforcement - Profile tab:
Figure 322: TACACS+ Based Enforcement Profile Tab
The following table describes the TACACS+ Based Enforcement Profile - Profile tab parameters:
Parameter Description
Template Select the template from the drop-down list. In this context, select TACACS+ Based
Enforcement.
Name Enter the name of the profile. The name is displayed in the Name column on the Configuration
> Enforcement > Profiles page.
Description Enter a description of the profile. The Description is displayed in the Description column on the
Configuration > Enforcement > Profiles page.
Type TACACS. The field is populated automatically.
Action Disabled.
Device Group
List
Select a Device Group from the drop-down list. The list displays all configured Device Groups.
All configured device groups are listed in the Device Groups ( Configuration > Network >
Device Groups) page. After you add one or more device group(s), you can select a group and
take one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see Adding and
Modifying Device Groups on page 353.
Table 193: TACACS+ Based Enforcement Profile Tab Parameters