Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsW-ClearPass Virtual Appliances
351352353354355356357358359360
Parameter Description
Username
(SNMP v3
only)
Specify the Admin user name to use for SNMP read operations.
Authentication
Key (SNMP v3
only)
Specify the SNMP v3 with authentication option (SHA or MD5).
NOTE: The EAP-MD5 authentication type is not supported if you run Dell Networking W-
ClearPass Policy Manager in the FIPS (Administration > Server Manager > Server
Configuration > FIPS) mode.
Privacy Key
(SNMP v3
only)
Specify the SNMP v3 with privacy option.
Privacy
Protocol
(SNMP v3 with
privacy only)
Choose one of the available privacy protocols:
l DES-CBC
l AES-128
Table 198:
SNMP Read Settings Parameters (Continued)
SNMP Write Settings
Use the SNMPWrite Settings tab to define values that allow Dell Networking W-ClearPass Policy Manager to
write to (manage) the device using SNMPv1, SNMPv2, or SNMPv3.
The following figure displays the SNMP Write Settings tab:
Figure 329: SNMP Write Settings Tab
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Network Access Devices | 351